Lowongan Energy Equity Epic (Sengkang)

Energy Equity Epic (Sengkang) Pty Ltd., as Contractor and Operator for BPMIGAS under the Sengkang Cooperation/Production Sharing Contract, Area onshore South Sulawesi with existing gas production is seeking suitable qualified end experienced personnel following position:

Sr. PRODUCTION OPERATOR (SPO)

Qualification:
• Male Max 40 years old

Education:
• SMU IPA/SMK Mechanic/Machine Electro, D-3 Technical, S-1 Technical.
• Minimum ten (10) years experience for High School Exacta/Technical (SMU IPA, SMK Mechanic Machine/Electro), minimum eight (8) years experience for D-3, minimum five (5) years for S1 experience in Production Oil and Gas Industries.

PRODUCTION OPERATOR (PO)
• Male Max 35 years old

Education
• SMU IPA, SMK Mechanic/Machine Electro, D-3 Technical, S-1 Technical
• Minimum seven (7) years experience for High School Exacts/Technical (SMU PA, SMK Mechanic/Machine/Electro minimum five (5) years experience for 0-3, minimum three (3) years for S-f experience in Production Oil and Gas Industries.

Having experience to handle:
- Wellhead X-Mast Tree
- Gas Process Facilities (Gas Sweetening and Dehydrating)
- Hot Off Heater (Direct and Indirect Heater)
- Pipe Line! Flow line Maintenance (Launch / Receive pig)
- Waste Water
• Highly motivated pleasant personality conscientious, good communication, hard worker.
• Good Command of English (verbal & written) and computer literate is advantage.
• Willing to work under high pressure and high temperature at Gas Processing Plant and waft head. Working on rotation and shift basis (two week on duty, two week off duty)
• Preferably from local origin South Sulawesi.

INSTRUMENT TECHNICIAN (IT)
ELECTRIC TECHNICIAN (ET)
MECHANIC TECHNICIAN (MT)

Qualification:
1. Male Max 40 years old. Minimum SMK / SMA, Technical D3, majoring in Electrical / Instrumentation and Mechanic from recognized education Institute / University in Indonesia.
2. Experience in this subject department any company it: Mining, Oil and Gas sector will be preferred; minimum 2 (two) years for S1, 4 (four) years for D3 graduate and 7 (seven) years for SMK graduate.
3. Have experience to handle:
• Operation, repair, maintenance & trouble shooting of:
- PLC, Electronic and pneumatic Controller (IT)
- Gas & Diesel Engine power generator, air compressor (ET & MT)
- Switchgear, relay protection, MCC, UPS & automatic voltage regulator (ET)
• Centrifugal pump, duplex pump, pneumatic pump, submersible pump, heat exchange fans cooler, shaft alignment. (MT)
- Waukesha, Cummins, caterpillar engine, backhoe, loader, crane. (MT)
• Repair & calibration instrument equipments as Electronic Transmitter, Pneumatic controller pneumatic transducer, Pressure switch, Temperature switch, Level switch, Flow recorder, Liquid flow meter etc. (IT)
• Instrument control engine as Waukesha, Cummins, Caterpilar engine. (IT & ET)) 4. Good command of English (oral & written) and computer literate is advantage.
5. Willing to work under high pressure and high temperature at Gas Processing Plant and Wet Head. Working on rotation and shift basis (two week on duty-two week off duty l2 hrs per day).
6. Preferably from local origin South Sulawesi.

Application letter complete with comprehensive resume, recent photograph and personal work references to be submitted later than 2 weeks after this advertisement to the address below. All application will be treated as confidential. Only short-listed applicants wilt be invited for-further Interview.

HRD DEPARTMENT
ENERGY EQUITY EPIC (SENGKANG) PTY. LTD. PO BOX 140 Sengkang 90911
Kabupaten Wajo, Sulawesi Selatan.
eees.site@energyequity.co.id

Lowongan Kerja Benua Cakra Petrolindo

PT Benua Cakra Petrolindo (BECAP) is a leading energy conservation and heat transfer specialist company, providing the customer with very highly up to date heat transfer and efficiency equipments; providing solutions and services to the customer in the petrochemical, oil and gas industry in the Region

Our Vision
To Become a World Leader in Performance Maintenance Service Solutions, Also Achieving Benefit and Growing Together

Our Mission
Customer Satisfaction, Safety, Reliability and Benefit

Sales Engineer (Jakarta Raya)
Requirements:

* Male/Female
* Minimum graduated from Technical High School / D3 Chemical Analysis / D3 Instrument Analysis Chemical /D3 Phisic Instrumentation / S1 Electrical/Chemical/Instrumentation/Mechanical/Physics
* At least 1 year experience in oil&gas, petrochemical, food,or similar industries
* Having driving license
* Able to work in a team as well as individual
* Can work under pressure

Marketing Support (Jakarta Raya)
Requirements:

* Technical High School / D3 Chemical Analysis / D3 Instrument Analysis Chemical /D3 Phisic Instrumentation / S1 Electrical/Chemical/Instrumentation/Mechanical/Physics
* Capable of performing installation, commissioning, calibration , trouble shotting of instruments such as Gas
* Analyser, Distillation, Flashpoint, etc
* Having driving license

Instrument Technician (Jakarta Raya)
Requirements:

* Male / Female
* Minimum graduated from Technical High School / D3 Chemical Analysis / D3 Instrument Analysis Chemical /D3 Phisic Instrumentation / S1 Electrical/Chemical/Instrumentation/Mechanical/Physics
* At least 1 year experience in oil&gas, petrochemical, food,or similar industries
* Having driving license
* Attention to details

Staf Accounting (Jakarta Raya)
Requirements:

* Male/Female
* D3 Accounting
* Min 1 year experience in related field
* Able to operate Accurate Program and Tax is preferred
* Attention to details
* Able to work under pressure

Those who are interested and meet the above requirement, please send your complete application letter, resume, a recent photograph, and indicate the position title at the upper left the envelope not later than 10 days after the date of this advertisement to:

PT BENUA CAKRA PETROLINDO
Kompleks Roxy Mas Blok D5 No.3
Jakarta 10150 Indonesia
Or
Email to: hrd@becap.com

Lowongan Kerja Kertas Nusantara

PT Kertas Nusantara has a commitment to its employees, customers and neighbors to operate the facilities as a steward of the environment. Mill Supervisors are trained to promote environmental awareness among employees as an intrinsic part of their everyday work. Since the beginning, Kertas Nusantara has committed to being an environmental leader through a policy of not cutting virgin forests, managing our own forest land on a firm schedule to achieve sustainable forestry.

1. Instrument/DCS Technician, code : E1
2. Electrical Technician, code : E2
3. Mill Trainee, code : E3
4. Mechanical Technician, code : E4
5. Administration, code : E5
6. Industrial Relation & Manpower Planning Supervisor, code : E6
7. Draftsman, code : E7

1. Instrument/DCS Technician, code : E1
* Education min. STM graduated in Instrumentation/Electronic
* Experience in Instrument & DCS Technician

2. Electrical Technician, code : E2 ( Experiences )
* Education min. D3 degree in Electrical, Knowledge program PLC & PVD
* Experience in Electrical Technician at a big industry, preferred experiencing in high voltage strong current distribution code : E2.1 ( Non Experiences )
* Education min. D3 degree in Electrical. GPA. 3.01

3. Mill Trainee, code : E3
* Education min. D3 degree in Chemistry Engineer

4. Mechanical Technician, code : E4
* Education min. D3 degree in Mechanical Engineer & Mechatronica

5. Administration, code : E5
* Education min. D3 degree in English, Informatika, Secretary, Economy and Accounting

6. Industrial Relation & Manpower Planning Supervisor, code : E6
* Education min. S1 degree in Law, experienced in problem solving of industrial relation and good knowledge of Labor Legislation
* Education min. S1 degree in Psychology, experienced in recruitment, counseling and manpower planning

7. Draftsman, code : E7
* Education background min. D3 in Civil Engineer

Surat permohonan secara tertulis dalam bahasa Inggris, dengan CV rinci dan foto terbaru 4×6 cm, nomor kontak telepon, alamat email dan referensi, harus dikirimkan ke alamat berikut, tidak lebih dari 8 hari setelah iklan ini. Hanya kandidat terbaik yang akan dipanggil.

HUMAN RESOURCES SECTION
PO. BOX.110. TANJUNG REDEB 77300
Email: srecruitment@site.kertas-nusantara.com

Lowongan Kerja San Miguel Pure Foods

San Miguel Pure Foods Company, Inc. is the largest Filipino-owned food company, with nearly 3,000 employees deployed in a broad nationwide network of offices, farms, manufacturing, processing and distribution facilities.

It holds in its portfolio the names of some of the most formidable brands in the Philippine food industry, among them, Magnolia, Purefoods, Monterey, Star and Dari Crème. B-Meg and Pure Blend, on the other hand, are the market-leaders in the Animal Feeds industry.

San Miguel Pure Foods integrated operations range from breeding, contract growing, processing and marketing of chicken, pork and beef to the manufacture of refrigerated, canned and ready-to-cook meat products, butter, cheese, margarine, oils and fats, as well as animal and aquatic feeds.

The support of parent company San Miguel Corporation and partnerships with major international companies like Hormel Foods International and the Super Coffeemix Manufacturing Limited of Singapore have given San Miguel Pure Foods access to the latest technologies and expertise, allowing it to deliver flavor, freshness, safety, quality and value-for-money to its customers.

Production Supervisor (PRO-SPV)
Male, max 30 years old. Bachelor in Technical Industry / Biology / Food Technology / Husbandry Technology / Food Hygiene. Have knowledge of GMP & HACCP / ISO 22000. At least 2 years experience in food manufacturing

QC Supervisor (QC-SPV)
Male, max 35 years old. Bachelor in Polytechnic - Chemistry / Biology / Food Technology / Husbandry Technology / Food Hygiene. Have knowledge of GMP & HACCP / ISO 22000. At least 2 years experience in food manufacturing

Safety Officer (SAVE)
Male, max 30 years old. Graduated in Public Health Facility or Technical background with experience as Safety Officer. Have knowledge in Safety Regulations, training program & SOP, HACCP, GMP, good English is preferable. At least 1 year experience in food manufacturing. Computer literate

Electrical / Instrument Technician (TECH)
Male, max 27 years old. D3 Electrical / Instrumentation with 1 year experience or STM Electrical / Instrumentation with 3 years experience. Good knowledge with PLC or Servo Controller. Willing to work in shift

QC in Line (QC)
Male, max 27 years old. Diploma in Supervisor Food Quality Assurance / Biology / Food Technology / Husbandry Technology / Food Hygiene. Have knowledge of GMP & HACCP / ISO 22000. At least 1 year experience in food manufacturing. Willing to work in shift

Please send your application, CV, expected salary and recent photograph not later than 30 September 2010 to:

PT San Miguel Pure Foods Indonesia
(HRD-Recruitment)
Jl Raya Bogor Km 37 Sukamaju, Cilodong - Depok 16415
Only short listed candidates will be contacted

Lowongan Kerja Petrotec

Petrotec - A Qatar based Oil and Gas Services Company supplying equipment a engineering support looking for bright and self motivated individuals to work in Qatar. We require fully experienced technical personnel with good command over English & proficient in the use of Computers.

We offer an independent and excellent work environment along with lots of growth opportunities. AU positions come with company provided accommodation, yearly airfare and regular opportunities for enhancement through training.

Welding Demonstrator

• A coded welder with previous experience as a trainer I certifier, ability to discuss and talk about welding system, wave patterns and complex welding technology.
• Required to set up machine demonstrate their use and train our clients.
• Minimum 2 years of experience.

Electrical Technician - Panel Board

• Should have experience in assembling of switch boards. Knowledge of wiring, bus bar work.
• Should be able to read the drawing and work independently.
• Minimum 2-3 years of experience.
• Diploma in Electrical Engineering.

Industrial Electrician.

• Hands on experience and knowledge in. HT/LT electrical machineries such as industrial elevator, EOT cranes, air compressor, hydraulic and pneumatic controls.
• Minimum 5-7 years experience in the plant machinery maintenance.
• Diploma 1111 in Electrical Engineer.
• Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical works.

Instrument Technician

• Hands on knowledge in the field instrument installation, commissioning, repairs, maintenance, calibration of system and fully conversant with HART communication protocol.
• Minimum 5-7 years of experience in the plant of maintenance.
• Diploma/ITI in Electrical Engineer.
• Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical Works.

Mechanical Technician

• Hands on experience in overhauling rotating equipment like Manual Valves, Pumps, Motors etc.
• Skilled to perform In-situ overhauling of mechanical equipment.
• Experienced in shutdown work.
• Minimum 4-6 years experience.
• Diploma HTI in Mechanical Engineering.

Valve Technician

• Hands on experience in overhauling Safety Relief Valve / Pressure Relief Valve, Vacuum Valve, Control Valve.
• Experienced to perform hot setting of boiler valve.
• Skilled to perform in-situ overhauling of welded valve.
• Factory certified technicians will be given preference.
• Should be capable to perform refurbishment of Manual Valves..
• Experienced in shutdown works.
• Minimum 5 years experience.
• Diploma/ITI in Mechanical Engineer.

Chemical Technician

• Experience working in industrial chemical cleanings.
• Perform air and steam blowing.

Chemical Engineer

• Preparing the Engineering Design, Completing site visits to gather required information. Develop the procedure for the operations accordingly.
• Completing the Operation, loading a working crew ensuring that the method statement is followed. Supervision of the job completion.
• Contact with the client during the operation.
• Following the QA QC directives for the operation. Chemical analysis, inspections.
• Completing a report after the service is completed.

Please email your CV with the Job Title mentioned in the subject to cv@petrotec.com.qa or cv@bidartimur.co.id

Petrotec
Fax: (+974)4410604
P.O. Box: 16069
8th Floor Toyota Tower Doha, Qatar

PT. Bidar Timur
JL. Budi Np. 20 Cawang Dewi Sartika
Jakarta 13630 Fax: 021 8014020

Lowongan Kerja YTL Power

PT. YTL JAWA TIMUR PAITON II POWER STATION Under Indonesia s private power programme, PT. YTL Jawa Timur operates and maintains this 2 x 650 MW Coal-fired Power Station. The station is located at Paiton, Probolinggo District of East Java, 141 km Southeast of Surabaya.

We currently have vacancies for:

CONTROL & INSTRUMENT TECHNICIAN - Code: C&I TECH

You will be responsible to perform maintenance, troubleshooting and repair of Field Control & Instrumentation equipment at Boiler & Turbines Plant Area.

Candidate for this position should possess:

• Maximum 35 years old;
  
• Minimum Diploma 3 years (D3) in Physics Engineering or Electronic / Instrumentation from a reputable local University / Polytechnic;
  
• Minimum having 3 years relevant experiences at Power Plant or Heavy Industries;
  
• Good skill in instrumentation, control and automation system troubleshooting;
  
• Having good knowledge in control, instrumentation and automation equipment (pneumatic, electronic and microprocessor bassed / smart system) and familiar with Siemens and Allen Bradley PLCs and its Man machines interfaces;
  
• Accurate, reliable and enthusiasm;
  
• Capable and willingness to work under pressure and extended working hours;
  
• Good written and spoken English.

CONTROL & INSTRUMENT SUPERVISOR - Code: C&I SPV

The successful applicant will be expected to lead and supervise the C&I and DCS Technician Group on a day to day basis. Responsibilities will include control and supervision of maintenance activities in the areas of C&I and Plant Automation. The ability to support engineers in the areas of planning, troubleshooting and rectification of defects is required.

Applicants for this position should fulfil the following requirements:

• Maximum 40 years old;
  
• Minimum Diploma 3 years (D3) in Physics Engineering or Electronic / Instrumentation from a reputable local University / Polytechnic;
  
• Minimum having 5 years relevant experiences at Power Plant or Heavy Industries;
  
• Good skill in instrumentation, control and automation system troubleshooting;
  
• Having good knowledge in control, instrumentation and automation equipment (pneumatic, electronic and microprocessor bassed / smart system) and familiar with Siemens and Allen Bradley PLCs and its Man machines interfaces;
  
• Have good supervisory skill;
  
• Capable and willingness to work under pressure and extended working hours;
  
• Good written and spoken English.

Remuneration and benefits will be comparable with the best in this industrial sector. Please submit a fully detailed CV in English, latest on Wednesday, 11 November 2009 to:

PT. YTL JAWA TIMUR
Tromol Pos No. 36
Paiton - Probolinggo, Jawa Timur 67291
Or recruitment@ytljt.com

Your CV will be kept in strict confidence.
Please include a contact telephone number and recent photograph

LOWONGAN KERJA PREMIER OIL Marine Superintendent, Electrical / Instrument Technician, Safety Officer, Pipeline Engineer, QC Specialist

Lowongan Kerja Februari 2009 QC Specialist, Pipeline Engineer, Safety Officer, Electrical / Instrument Technician, Marine Superintendent Premier Oil

Lowongan Kerja Premier Oil, an international oil and gas exploration and production Company with interest in the UK, Asia and Africa. We are currently seeking for high caliber candidate to fill the position.

Successful applicant will play a large in helping the progress of the company.

We are looking for:

1. Lowongan Kerja QC Specialist
2. Lowongan Kerja Pipeline Engineer
3. Lowongan Kerja Safety Officer - exp in Drilling Rig Offshore
4. Lowongan Kerja Electrical Technician
5. Lowongan Kerja Instrument Technician
6. Lowongan Kerja Marine Superintendent

Requirements:

• 7 - 10 yrs experience in oil and gas company
• Fluent English both spoken and written

Attractive compensation packages will be negotiated commensurate with experience, qualifications, and the seniority of each position.

Please submit a comprehensive resume in English with contact number not later than 19 February 2009 to:

HUMAN RESOURCES DEPARTMENT
E-mail : NPutranti@premier-oil.com
Please Note CVs not more than 1 MB and only short-listed candidates will be contacted

LOWONGAN KERJA Control and Instrument Technician, Electrical Technician PT YTL JAWA TIMUR

PT. YTL JAWA TIMUR PAITON II POWER STATION. Under Indonesia s private power programme, PT. YTL Jawa Timur operates and maintains 2 x 610 MW Coal-fired Power Station. The station is located at Paiton, Probolinggo District of East Java, 141 km Southeast of Surabaya.

ELECTRICAL TECHNICIAN Code: ET

You will be responsible to perform electrical maintenance at Main Power Plant equipments.

Candidate for this position should possess :

• Minimum Diploma 3 years (03) in Electrical Engineering from a reputable local University
• Having 4 years relevant experiences in heavy industries
• Good skill in electrical machines (Generators, Motors, Switchgears, Transformers, DC Supply, etc) and its associated interlocking and protection system for all voltage levels (low, high and extra high voltage)
• Preferably having sound knowledge in PLC, Corrosion Control Equipment an Electromechanical Systems
• Energic, high enthusiasm, tough and reliable
• Good attitude, able to work in extended and call in times
• Good written and spoken English.

CONTROL & INSTRUMENT TECHNICIAN - Code: C&I
You will be responsible to perform maintenance, troubleshooting and repair of Field Control & Instrumentation equipment at Boiler & Turbines Plant Area.

Candidate for this position should possess :

• Minimum Diploma 3 years (D3) in Physics Engineering or Electronic from a reputable local University / Polytechnic
• Having 3 years relevant experiences at heavy industries or power plants
• Good skill in instrumentation, control and automation system troubleshooting
• Having good knowledge in control, instrumentation and automation equipment (pneumatic, electronic and microprocessor bassed / smart system) and familiar with Siemens and Allen Bradley PLCs and its Man machines interlaces
• Accurate, reliable and enthusiasm
• Capable and willingness to work under pressure, extended working hours and Call In scheme
• Good written and spoken English.

Remuneration and benefits will be comparable with the best in this industrial sector. Please submit a fully detailed CV in English, latest on 22 August 2008 to:

PT YTL JAWA TIMUR
Tromol Pos No.36
Paiton - Probolinggo, Jawa Timur 67291
Or e-mail : recruitment@ytljt.com
Your CV will be kept in strict confidence
Please include a contact telephone number and recent photograph