Lowongan Energy Equity Epic (Sengkang)

Energy Equity Epic (Sengkang) Pty Ltd., as Contractor and Operator for BPMIGAS under the Sengkang Cooperation/Production Sharing Contract, Area onshore South Sulawesi with existing gas production is seeking suitable qualified end experienced personnel following position:

Sr. PRODUCTION OPERATOR (SPO)

Qualification:
• Male Max 40 years old

Education:
• SMU IPA/SMK Mechanic/Machine Electro, D-3 Technical, S-1 Technical.
• Minimum ten (10) years experience for High School Exacta/Technical (SMU IPA, SMK Mechanic Machine/Electro), minimum eight (8) years experience for D-3, minimum five (5) years for S1 experience in Production Oil and Gas Industries.

PRODUCTION OPERATOR (PO)
• Male Max 35 years old

Education
• SMU IPA, SMK Mechanic/Machine Electro, D-3 Technical, S-1 Technical
• Minimum seven (7) years experience for High School Exacts/Technical (SMU PA, SMK Mechanic/Machine/Electro minimum five (5) years experience for 0-3, minimum three (3) years for S-f experience in Production Oil and Gas Industries.

Having experience to handle:
- Wellhead X-Mast Tree
- Gas Process Facilities (Gas Sweetening and Dehydrating)
- Hot Off Heater (Direct and Indirect Heater)
- Pipe Line! Flow line Maintenance (Launch / Receive pig)
- Waste Water
• Highly motivated pleasant personality conscientious, good communication, hard worker.
• Good Command of English (verbal & written) and computer literate is advantage.
• Willing to work under high pressure and high temperature at Gas Processing Plant and waft head. Working on rotation and shift basis (two week on duty, two week off duty)
• Preferably from local origin South Sulawesi.

INSTRUMENT TECHNICIAN (IT)
ELECTRIC TECHNICIAN (ET)
MECHANIC TECHNICIAN (MT)

Qualification:
1. Male Max 40 years old. Minimum SMK / SMA, Technical D3, majoring in Electrical / Instrumentation and Mechanic from recognized education Institute / University in Indonesia.
2. Experience in this subject department any company it: Mining, Oil and Gas sector will be preferred; minimum 2 (two) years for S1, 4 (four) years for D3 graduate and 7 (seven) years for SMK graduate.
3. Have experience to handle:
• Operation, repair, maintenance & trouble shooting of:
- PLC, Electronic and pneumatic Controller (IT)
- Gas & Diesel Engine power generator, air compressor (ET & MT)
- Switchgear, relay protection, MCC, UPS & automatic voltage regulator (ET)
• Centrifugal pump, duplex pump, pneumatic pump, submersible pump, heat exchange fans cooler, shaft alignment. (MT)
- Waukesha, Cummins, caterpillar engine, backhoe, loader, crane. (MT)
• Repair & calibration instrument equipments as Electronic Transmitter, Pneumatic controller pneumatic transducer, Pressure switch, Temperature switch, Level switch, Flow recorder, Liquid flow meter etc. (IT)
• Instrument control engine as Waukesha, Cummins, Caterpilar engine. (IT & ET)) 4. Good command of English (oral & written) and computer literate is advantage.
5. Willing to work under high pressure and high temperature at Gas Processing Plant and Wet Head. Working on rotation and shift basis (two week on duty-two week off duty l2 hrs per day).
6. Preferably from local origin South Sulawesi.

Application letter complete with comprehensive resume, recent photograph and personal work references to be submitted later than 2 weeks after this advertisement to the address below. All application will be treated as confidential. Only short-listed applicants wilt be invited for-further Interview.

HRD DEPARTMENT
ENERGY EQUITY EPIC (SENGKANG) PTY. LTD. PO BOX 140 Sengkang 90911
Kabupaten Wajo, Sulawesi Selatan.
eees.site@energyequity.co.id

Lowongan Bayer MaterialScience

Bayer MaterialScience, a subgroup of Bayer AG, is one of the world's largest producers of hi-tech materials to suit the varied application demand of the modern world. Its innovative developments in coatings, adhesives, sealants, Polyurethanes and Polycarbonates significantly enhance the quality of our lives - Science for a better Life.

PT Bayer MaterialScience Indonesia, a subsidiary of Bayer AG, currently seeks experienced, dynamic individuals to serve in a highly charged, exciting environment open to constant innovation:

Mechanical Technician

Your qualifications:

* Diploma from Mechanical Engineering with 3 years related experience.
* Having experience working in chemical industries would be an advantage
* Excellent trouble shooting in mechanical equipment
* Reliable person, and good team player
* Able to work under pressure
* Willing to work in Cilegon area

All applications will be treated confidentially, only short-listed candidates will be notified Qualified applicants are invited to submit CV, including current and expected salaries and recent photograph to

HRD Department at:

careerbayer_id@bayer-ag.de

Please mark in the e-mail subject with : [TM]

Only applicants who meet the above requirements will be notified and invited for interview

Lowongan Indopoly Swakarsa Industry

PT. Indopoly Swakarsa Industry Tbk, (Indopoly) founded in 1996, is an acknowledged leader in various packaging film manufacturing. Indopoly's custom-made products are in high demand among manufacturers worldwide seeking high quality flexible packaging film. Due to the rapid growth of our factory in Purwakarta we need highly qualified and talented person to fill in the challenging position:

SENIOR TECHNICIAN (ELECTRICAL/ MECHANICAL)
Qualification:

* Male, max. 30 years old
* Min. D3 degree in Mechanical / Electrical / Electronic
* Preferable have experience min. 2 years (preferable in plastic industry)
* Excellent to operate MS. Office, Open Office application & AutoCAD.
* Able to operate Boiler, Compressor and Utility tools, preferably in welding and lathes (for Mechanical position)
* Has understanding and experience in PLC Siemens S5 - S7, AC & DC Driver Control, PID Control, electric & circuit (for Electrical position)
* Fluency in spoken and written English
* Willing to be placed in Purwakarta, West Java

QUALITY CONTROL SUPERVISOR
Qualification:

* Male, max. 26 years old
* Min. S1 degree in Chemical Engineering, from reputable university
* Fresh graduate, min. GPA 3.00 (4 scale)
* Excellent to operate MS. Office & Open Office application
* Fluency in spoken and written English
* Willing to be placed in Purwakarta, West Java

PPIC SUPERVISOR
Qualification:

* Male or female, max. 30 years old
* Min. S1 degree in Industrial Engineering / Industrial Management / Production Management
* Preferable have experience in the related field min. 2 years
* Able to analysis problem, makes production plan, and familiar with ISO procedure
* Fluency in spoken and written English
* Excellent to operate MS. Office application
* Strong leadership, good team player
* Willing to be placed in Purwakarta, West Java

Interested and qualified applicant could submit the application letter,CV, contact number and recent photograph (max. 400 KB) to: recruitment@indopoly.co.id

Only Qualified Candidates will be notified

Lowongan Kerja Kertas Nusantara

PT Kertas Nusantara has a commitment to its employees, customers and neighbors to operate the facilities as a steward of the environment. Mill Supervisors are trained to promote environmental awareness among employees as an intrinsic part of their everyday work. Since the beginning, Kertas Nusantara has committed to being an environmental leader through a policy of not cutting virgin forests, managing our own forest land on a firm schedule to achieve sustainable forestry.

1. Instrument/DCS Technician, code : E1
2. Electrical Technician, code : E2
3. Mill Trainee, code : E3
4. Mechanical Technician, code : E4
5. Administration, code : E5
6. Industrial Relation & Manpower Planning Supervisor, code : E6
7. Draftsman, code : E7

1. Instrument/DCS Technician, code : E1
* Education min. STM graduated in Instrumentation/Electronic
* Experience in Instrument & DCS Technician

2. Electrical Technician, code : E2 ( Experiences )
* Education min. D3 degree in Electrical, Knowledge program PLC & PVD
* Experience in Electrical Technician at a big industry, preferred experiencing in high voltage strong current distribution code : E2.1 ( Non Experiences )
* Education min. D3 degree in Electrical. GPA. 3.01

3. Mill Trainee, code : E3
* Education min. D3 degree in Chemistry Engineer

4. Mechanical Technician, code : E4
* Education min. D3 degree in Mechanical Engineer & Mechatronica

5. Administration, code : E5
* Education min. D3 degree in English, Informatika, Secretary, Economy and Accounting

6. Industrial Relation & Manpower Planning Supervisor, code : E6
* Education min. S1 degree in Law, experienced in problem solving of industrial relation and good knowledge of Labor Legislation
* Education min. S1 degree in Psychology, experienced in recruitment, counseling and manpower planning

7. Draftsman, code : E7
* Education background min. D3 in Civil Engineer

Surat permohonan secara tertulis dalam bahasa Inggris, dengan CV rinci dan foto terbaru 4×6 cm, nomor kontak telepon, alamat email dan referensi, harus dikirimkan ke alamat berikut, tidak lebih dari 8 hari setelah iklan ini. Hanya kandidat terbaik yang akan dipanggil.

HUMAN RESOURCES SECTION
PO. BOX.110. TANJUNG REDEB 77300
Email: srecruitment@site.kertas-nusantara.com

Lowongan Kerja Petrotec

Petrotec - A Qatar based Oil and Gas Services Company supplying equipment a engineering support looking for bright and self motivated individuals to work in Qatar. We require fully experienced technical personnel with good command over English & proficient in the use of Computers.

We offer an independent and excellent work environment along with lots of growth opportunities. AU positions come with company provided accommodation, yearly airfare and regular opportunities for enhancement through training.

Welding Demonstrator

• A coded welder with previous experience as a trainer I certifier, ability to discuss and talk about welding system, wave patterns and complex welding technology.
• Required to set up machine demonstrate their use and train our clients.
• Minimum 2 years of experience.

Electrical Technician - Panel Board

• Should have experience in assembling of switch boards. Knowledge of wiring, bus bar work.
• Should be able to read the drawing and work independently.
• Minimum 2-3 years of experience.
• Diploma in Electrical Engineering.

Industrial Electrician.

• Hands on experience and knowledge in. HT/LT electrical machineries such as industrial elevator, EOT cranes, air compressor, hydraulic and pneumatic controls.
• Minimum 5-7 years experience in the plant machinery maintenance.
• Diploma 1111 in Electrical Engineer.
• Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical works.

Instrument Technician

• Hands on knowledge in the field instrument installation, commissioning, repairs, maintenance, calibration of system and fully conversant with HART communication protocol.
• Minimum 5-7 years of experience in the plant of maintenance.
• Diploma/ITI in Electrical Engineer.
• Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical Works.

Mechanical Technician

• Hands on experience in overhauling rotating equipment like Manual Valves, Pumps, Motors etc.
• Skilled to perform In-situ overhauling of mechanical equipment.
• Experienced in shutdown work.
• Minimum 4-6 years experience.
• Diploma HTI in Mechanical Engineering.

Valve Technician

• Hands on experience in overhauling Safety Relief Valve / Pressure Relief Valve, Vacuum Valve, Control Valve.
• Experienced to perform hot setting of boiler valve.
• Skilled to perform in-situ overhauling of welded valve.
• Factory certified technicians will be given preference.
• Should be capable to perform refurbishment of Manual Valves..
• Experienced in shutdown works.
• Minimum 5 years experience.
• Diploma/ITI in Mechanical Engineer.

Chemical Technician

• Experience working in industrial chemical cleanings.
• Perform air and steam blowing.

Chemical Engineer

• Preparing the Engineering Design, Completing site visits to gather required information. Develop the procedure for the operations accordingly.
• Completing the Operation, loading a working crew ensuring that the method statement is followed. Supervision of the job completion.
• Contact with the client during the operation.
• Following the QA QC directives for the operation. Chemical analysis, inspections.
• Completing a report after the service is completed.

Please email your CV with the Job Title mentioned in the subject to cv@petrotec.com.qa or cv@bidartimur.co.id

Petrotec
Fax: (+974)4410604
P.O. Box: 16069
8th Floor Toyota Tower Doha, Qatar

PT. Bidar Timur
JL. Budi Np. 20 Cawang Dewi Sartika
Jakarta 13630 Fax: 021 8014020

Lowongan Kerja McDermott Indonesia Senior / Electrical / Instrument / Mechanical / Telecom / HVAC Technician

PT McDermott Indonesia, eEstablished on Batam Island, Indonesia, in 1970, this facility has over 37 years of experience in executing engineering-procurement- construction-installation projects, from traditional bottom-founded facilities to floating hulls and their associated topsides. Since operations began, the yard has fabricated more than 600 structures weighing a total of over 694,456 tons. Located on the north coast of Batam Island in the Riau archipelago of Indonesia and just 12 miles south east of the Republic of Singapore, the fabrication facility serves the oil and gas industry in Asia Pacific, as well as export to the Gulf of Mexico, Europe, West Africa and Indian sub-continent. Our facility includes fully equipped prefabrication shops, two pipe rolling mills, and dedicated carbon steel and exotic materials pipe shops. Manned with experienced and highly trained personnel, our skilled workforce is dedicated to meeting the needs of any offshore development project.

ELECTRICAL SENIOR TECHNICIAN (EST)
Key Responsibility:

• Planning & supervising daily work schedule for team of multinational electrical commissioning technician.
  
• Carrying out inspection, pre-commissioning & commissioning activities, equipments to achieve completion & handover to commissioning.
  
• Compilation of; punch list, commissioning test records.
  
• Liaison with vendor.
  
• Carrying out; calibration, function testing, built amendments to drawing.

Requirement:

• Conversant with electrical safety isolation procedures.
  
• Able to read & interrupt electrical single diagram.</li>

ELECTRICAL TECHNICIAN (E-TECH)
Key Responsibility:

• Carrying out daily work schedule of electrical commissioning.
  
• Compilation of; punch list, commissioning test records.
  
• Conducting all electrical work activities.
  
• Testing and repairing of all electrical equipment.

Requirement:

• Conversant with electrical safety isolation procedures.
  
• Able to read & interrupt electrical single diagram.

INSTRUMENT SENIOR TECHNICIAN (IST)
Key Responsibilities:

• Planning & Supervising daily work schedule for team of multinational instrument commissioning technician.
  
• Carrying out inspection; pre-commissioning & commissioning activities to achieve completion & handover to commissioning.
  
• Compilation of; punch list, commissioning test records.
  
• Liaison with vendor.
  
• Carrying out; calibration, function testing, built amendments to drawing.

Requirement:

• Conversant with instrument safety isolation procedures.
  
• Able to read & interrupt instrument diagram.

INSTRUMENT TECHNICIAN (I-TECH)
Key Responsibilities:

• Carrying out inspection; pre-commissioning & commissioning activities.
  
• Conducting all instrument work activities.
  
• Compilation of; punch list, commissioning test records.
• Carrying out; calibration, function testing.

Requirement:

• Conversant with instrument safety isolation procedures.
  
• Able to read & interrupt instrument diagram.

MECHANICAL SENIOR TECHNICIAN (MST)
Key Responsibilities:

• Planning & Supervising daily work schedule for team of multinational Mechanical commissioning technician.
  
• Carrying out inspection; pre-commissioning & commissioning activities, equipments to achieve Mechanical completion & handover to commissioning.
  
• Compilation of; punch list, commissioning test records.
  
• Liaison with vendor.
  
• Carrying out; Calibration, function testing, built amendments to drawing.

Requirement:

• Experience of equipment alignment.
  
• Experience / knowledge of; reverse alignment techniques, micrometer, vernier gauges, depth gauges.
  
• Experience in; lube oil flushing, replacement of Mechanical Seal cartridge and dry gas seal assembly and installation.
• Conversant with Mechanical safety procedures.
  
• Able to read & interrupt Mechanical diagram.

MECHANICAL TECHNICIAN (M-TECH)
Key Responsibilities:

• Carrying out inspection; pre-commissioning & commissioning activities, equipments to achieve Mechanical completion & handover to commissioning.
  
• Conducting all mechanical work activities.
  
• Preparing & planning all mechanical work scope.

Requirements:

• Experience / knowledge of; micrometer, vernier gauges, depth gauges.
  
• Able to read & interrupt Mechanical diagram.
  
• Experience in: lube oil flushing, replacement of Mechanical Seal cartridge and dry gas seal assembly and installation.

TELECOM TECHNICIAN (TEL-TECH)
Key Responsibilities:

• Carrying out inspection; pre-commissioning & commissioning activities, equipments to achieve completion & handover to commissioning.
  
• Conducting all Telecom work activities.

Requirement:

• Conversant with Telecom safety isolation procedures.
  
• Able to read & interrupt Telecom diagram.

HVAC TECHNICIAN (HVAC)
Key Responsibilities:

• Carrying out inspection; pre-commissioning & commissioning activities, equipments to achieve completion & handover to commissioning.
  
• Conducting all HVAC work activities.

Requirement:

• Conversant with HVAC procedures.
  
• Able to read & interrupt HVAC diagram.

General requirements:

• D3/S1 technical degree.
  
• Min. 3 years of working experiences (Technician) and min. 5 years of working experiences (Senior Tech) and 3 years of which at supervisory level within oil & gas construction in oil & gas construction.
  
• Conversant with; Industry standard practice, installation & maintenance of equipment designed for use in hazards areas.
  
• Able to read & interrupt; schematic control circuit diagram, process flow & logic flow diagram.
  
• Fluent in spoken & written English.
  
• Computer literate & familiar with commonly used application; spread sheet, project management, data base.

If your vision of a work environment includes the challenges which can lead to personal growth, respect for ideas and colleagues who rank with the best, then please send your application and resume, quoting position title, with copy of qualification certificates and recent photograph (4x6cm) no later than 2 weeks to:

HR DEPARTMENT
PT. McDERMOTT INDONESIA
Jalan Bawal - Batu Ampar - Batam 29452
Email: hrd.batam@mcdermott.com

LOWONGAN KERJA OCCIDENTAL PETROLEUM QATAR LTD

OCCIDENTAL PETROLEUM OF QATAR LTD. (OPQL), a dynamic, fast-paced company continually striving to be of the best in the business. To illustrate our drive and commitment to excellence, in less than 40 years we have grown from a small California drilling company to one of the largest oil and gas producers in the U.S., and one of the world s largest publicly traded oil and gas company based on reserves and production. We are currently recruiting for the following positions located on our Offshore Installation PS-1.

OFFSHORE PRODUCTION OPERATOR -28/28 ROTATION Job Ref. 6530

Job Duties
Perform, in line with OPQL policies, his production shift duties of operating and monitoring all processes and equipment associated with the station s oil / gas production, utility and safety systems. In the event of a station emergency, assume role as designated by OIS; for station shutdown, be part of the shutdown team. Be fully conversant with his responsibilities as Area Authority within the Permit to Work System for keeping the worksite safe and clean, and ensuring that all isolations are performed using the stated isolation procedures. Advise Senior Production Operator of any potentially hazardous situations.

Minimum Requirements:

• Five years experience in Petrochemical or Oil & Gas Industry
  
• Good understanding of Process & Production Systems & Equipment.
  
• Familiar with the needs & requirements of PTW systems.

OFFSHORE MECHANICAL TECHNICIAN - 28/28 Rotation Job Ref. 6543

Job Duties
Perform general maintenance and repair activities (hands on) on all mechanical equipment in the offshore installation, in a safe and efficient manner; maximize productivity throughout the effective use of all available resources. Closely work with other fellow workers from his own and other departments to accomplish effective cross training.

Minimum Requirements:

• Five-Seven years experience in Petrochemical or Oil & Gas Industry
  
• Experience preferably with intervention in the maintenance and repair of mechanical equipment utilized in offshore installations, such as Gas turbines and diesel engines for electric power generation, centrifugal and positive displacement pumps, reciprocating and screw type air compressors, cranes, gas compressors, etc.

To view full Job Descriptions and requirements, apply via the Internet log on to:

www.oxy.com
Click: Careers
Click: Available Positions
Click: View Open Positions
Select: Location: QA-Doha

Uzma Group
68 Fraser Business Park,
Jalan Metro Pudu 2,55200 KL, Malaysia